PIN

315 213 58 PIN is typically one of those pivot points you find connecting a hydraulic cylinder rod end to a boom section or perhaps a feed beam component. Its main job is to take the shear load from the cylinder pushing or pulling, letting that joint articulate smoothly without binding up. It's essentially the backbone for movement in that specific area, handling the forces that make the drill move.

When this PIN starts getting tired, usually what happens is you’ll notice some slop in that joint. You might hear a distinct clunking sound, especially when the cylinder reverses direction or when there's a sudden load change. That play can lead to things not lining up quite right, maybe even a bit of drift if it's in a position-holding spot, or just generally sluggish, imprecise movement. It's not just the PIN wearing; often the bore it sits in starts to egg-shape too, which complicates things.

When you're replacing one of these, don't just yank the old one out and slap a new PIN in. Always take a good look at the bores in the components it connects – if they're ovaled out, that new PIN won't last long, and you'll be back at it sooner than you think. And for crying out loud, make sure you hit that grease nipple. It's amazing how many times those get overlooked, and proper lubrication is half the battle for these pins.