32072408
PRESSURE CONTR.BLOCK
This 320 724 08 PRESSURE CONTR.BLOCK is a critical hydraulic pressure control valve for your rig. It keeps system pressures steady, preventing surges and ensuring smooth, consistent operation of key functions like feed or rotation, which is vital for drilling performance.
Description
320 724 08 PRESSURE CONTR.BLOCK is usually the main gatekeeper for a specific hydraulic circuit, making sure the pressure doesn't run wild. Think of it as the bouncer for your oil flow; it lets enough through to do the job, but slams the door shut…
Full Technical Description
320 724 08 PRESSURE CONTR.BLOCK is usually the main gatekeeper for a specific hydraulic circuit, making sure the pressure doesn't run wild. Think of it as the bouncer for your oil flow; it lets enough through to do the job, but slams the door shut if things try to get too high. On a rig, this could be anything from keeping your feed pressure consistent so the bit doesn't jump, to making sure your rotation motor gets the right squeeze without blowing a seal. It's all about maintaining that steady, controlled force where you need it, preventing spikes that can really mess things up downstream.
When this valve starts going south, you'll definitely notice it. Usually what happens is the pressure in that circuit gets erratic. You might see the gauge needle bouncing around, or maybe the function it controls just feels sluggish and inconsistent. For example, if it's on your feed circuit, the drill string might not advance smoothly, or it could even stall out under load. Sometimes, you'll even hear a chattering noise from the valve itself as the spool tries to regulate but can't quite hold steady. That's a pretty good sign it's time to dig in and have a look, because it's not going to fix itself.
Replacing one of these isn't usually a huge job, but you gotta be careful. Always make sure the system is depressurized first, obviously. When you pull the old one, pay close attention to the condition of the O-rings and seats; sometimes the damage isn't just internal to the valve. And here's a common one people forget: after you install the new valve, always check for any trapped air in the lines right around it. A little bit of air can make a brand new valve act just as bad as the worn-out one you just pulled, giving you all sorts of headaches with pressure instability.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|
Brand
All Sandvik partsRelated parts
PRESSURE CONTR.VALVE
16751521
Similar part

FLOW CONTR.VALVE
81255269
Similar part

DIRECTION CONTR.VALVE
88736819
Similar part
POWER CONTR.MANIFOLD
88289689
Similar part
FEED PRESS.CONTR.BL
32072402
Similar part
PILOT CONTR.VALVE ASSY.
23485828b
Similar part

DRIVING CONTR.COVER
88663329
Similar part

DRIVING CONTR. COVER
88656049
Similar part
Customer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get PRESSURE CONTR.BLOCK 32072408
Jumbosan supplies PRESSURE CONTR.BLOCK 32072408. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.
