32556028
VALVE BLOCK BOLTING
The 325 560 28 BOLTING UNIT VALVE BLOCK 2 is a critical hydraulic component, directing fluid flow to specific rig functions. When it starts failing, you'll typically observe sluggish movements or drift in the controlled circuit, impacting operational precision.
Description
325 560 28 BOLTING UNIT VALVE BLOCK 2 is essentially the hydraulic brain for a specific function on your rig. It’s where the high-pressure oil gets directed, either opening up to let a cylinder extend or retract, or sending flow to a motor for…
Full Technical Description
325 560 28 BOLTING UNIT VALVE BLOCK 2 is essentially the hydraulic brain for a specific function on your rig. It’s where the high-pressure oil gets directed, either opening up to let a cylinder extend or retract, or sending flow to a motor for rotation. Think of it as a traffic cop for the fluid, making sure it goes exactly where it needs to go, whether that's to lift the boom, spin the drill string, or push the feed downhole. It’s got a bunch of spools and passages inside, all working together to control that flow, usually based on a pilot signal from your joysticks or control panel.
When this VALVE BLOCK BOLTING starts to wear out, you'll definitely notice it in the rig's performance. The most common thing is that the function it controls will get sluggish, or worse, it'll start to drift. Maybe your boom sags a bit when you're trying to hold it steady, or the feed pressure isn't consistent, causing the drill to jump or bog down. Sometimes you'll even hear a bit of a groan or a whine from the hydraulics as the fluid tries to get past worn spools or seals inside the block. It’s a good indicator that the internal clearances are shot, or a seal has failed, letting pressure bleed off where it shouldn't.
If you're replacing one of these, make sure you've got the system properly bled afterwards; air in the lines will just cause more headaches. Also, don't forget to check the pilot lines that feed into it. Sometimes the main block itself isn't the primary issue, but rather a weak or inconsistent pilot signal causing it to act up. Always double-check your connections and torque settings, obviously, and make sure you're using clean hydraulic fluid. A bit of grit can wreck a new VALVE BLOCK BOLTING in no time.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|---|
| Machine Type | DS410-C |
| Assembly | VALVE ASSEMBLY |
Brand
All Sandvik partsRelated parts

BOLTING MODULE
55206753c
Similar part

BOLTING MODULE
55189649b
Similar part

BOLTING MODULE
55161587
Similar part
BOLTING BOOM HEAD
55090264
Similar part
BOLTING BOOM HEAD
55171618a
Similar part
BOLTING BOOM HEAD
55155125
Similar part
BOLTING HEAD ASSY PACKING
32750528
Similar part
BOLTING HEAD ASSY PACKING
32750528c
Similar part
Customer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get VALVE BLOCK BOLTING 32556028
Jumbosan supplies VALVE BLOCK BOLTING 32556028. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.
