Ref. 1
502525
DEPTH INDICATOR
The 502525 DEPTH INDICATOR is your rig's early warning system for hydraulic filter condition. It visually alerts you when a filter is plugging up, helping prevent pump cavitation and overheating. Keeping an eye on this simple component can save you from bigger, more expensive hydraulic system failures down the line.
Description
502525 DEPTH INDICATOR is usually a pretty straightforward component, but it’s critical for keeping an eye on your hydraulic system's health. What it does is give you a visual cue when the differential pressure across a filter element gets too high…
Full Technical Description
502525 DEPTH INDICATOR is usually a pretty straightforward component, but it’s critical for keeping an eye on your hydraulic system's health. What it does is give you a visual cue when the differential pressure across a filter element gets too high. Basically, it’s telling you that your filter is starting to plug up and isn't letting enough oil through. If this thing pops up, it means the pump's working harder than it should to pull oil, or worse, it's starving for flow. It's a simple mechanical flag or sometimes an electrical signal, but it's your first warning before things get really ugly.
When this indicator starts acting up, you've got a couple of scenarios, neither of them good. The most common thing is it gets sticky or just plain breaks internally. If it's stuck in the ""clear"" position, you won't get that crucial warning when your hydraulic filter is actually plugging. You'll start noticing the rig's functions getting sluggish, maybe the pump making a whiny, cavitating noise, and the hydraulic oil temperature climbing faster than usual. On the flip side, if it's stuck in the ""dirty"" position, you'll be changing perfectly good filters, which is just wasting money and time. Either way, you're either running blind or chasing ghosts.
Replacing this indicator is usually pretty straightforward; just make sure you've got the system depressurized first, obviously. When you're swapping it out, take a quick look at the filter element itself – sometimes the indicator is just doing its job, and the filter really is plugged. A common thing folks forget is to check the bypass valve in the filter head. If that valve is sticking open, the indicator might never pop, even with a completely plugged filter, because the oil's just bypassing it. So, give that bypass a quick check too while you're in there.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|---|
| Machine Type | DI600 |
| Assembly | HOLE DEPTH METER |
Customer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get DEPTH INDICATOR 502525
Jumbosan supplies DEPTH INDICATOR 502525. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.





