55038433
OIL PRESSURE SWITCH
The 550 384 33 PRESSURE SENSOR acts as a critical sensor, providing feedback to your rig's control system about hydraulic or air pressure levels. It's essential for proper sequence operation and safety, preventing issues like erratic compressor cycling or system interlocks if it starts to fail.
Description
550 384 33 PRESSURE SENSOR is essentially the eyes and ears for your rig's control system when it comes to fluid or air pressure. It's not just a fancy gauge; this little unit actually closes or opens an electrical contact once a specific pressure…
Full Technical Description
550 384 33 PRESSURE SENSOR is essentially the eyes and ears for your rig's control system when it comes to fluid or air pressure. It's not just a fancy gauge; this little unit actually closes or opens an electrical contact once a specific pressure threshold is met. Think about it: it tells the PLC when your compressor has reached working pressure, or if a hydraulic circuit has enough juice to safely activate a function. Without it, the machine wouldn't know if it's safe to proceed with the next step in a drilling sequence, or if a critical system is over or under pressure. It's a fundamental feedback loop.
When one of these starts to go bad, you'll usually see some frustrating symptoms. The most common one is intermittent operation – maybe your compressor cycles on and off too frequently, or it takes forever to unload. You might get false alarms for low pressure, or conversely, the rig might not react to an actual pressure drop because the switch isn't reporting it correctly. I've seen rigs refuse to engage feed or rotation because the OIL PRESSURE SWITCH for a pilot circuit was sticking, telling the system there wasn't enough pressure when there actually was. It can really throw a wrench in your troubleshooting, making you suspect bigger issues.
Swapping these out isn't usually rocket science, but there are a couple of things to keep in mind. First, always double-check the actual system pressure with a known good gauge at the switch's port before you condemn the switch itself; sometimes the problem is further upstream, like a partially blocked line. Second, if your new switch has an adjustable setpoint, make sure it's calibrated to the rig's specifications. Don't just screw it in and assume it's good to go. And for crying out loud, don't forget to check the wiring connection for corrosion or damage; that's a classic oversight.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|---|
| Machine Type | DC122R |
| Assembly | ENGINE ASSEMBLY |
Used on machines
Brand
All Sandvik partsRelated parts

PRESSURE SWITCH
88426329
Similar part

PRESSURE GAUGE
81623329
Similar part
PRESSURE ACCUMULATOR
15237688a
Similar part
PRESSURE ACCUMULATOR
15237708a
Similar part
PRESSURE RELIEF VALVE
55041263
Similar part

PRESSURE RELIEF VALVE
55023571
Similar part
PRESSURE RELIEF VALVE
55174681
Similar part

PRESSURE RELIEF VALVE
55017817
Similar part
Customer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get OIL PRESSURE SWITCH 55038433
Jumbosan supplies OIL PRESSURE SWITCH 55038433. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.
