Ref. 2
55048581
TRACK FRAME L.H.
The 550 485 81 BEAM is the main structural component that supports the undercarriage on your rig. It keeps the track rollers, idler, and sprocket aligned, ensuring the track chain runs true. When it's compromised, you'll see accelerated wear on other track components and potentially track derailments.
Description
550 485 81 BEAM is essentially the backbone for your rig's undercarriage on one side. It’s what holds the track rollers, idler, and sprocket in their proper alignment, allowing the track chain to run smoothly. Without it, or if it's bent, you'd have…
Full Technical Description
550 485 81 BEAM is essentially the backbone for your rig's undercarriage on one side. It’s what holds the track rollers, idler, and sprocket in their proper alignment, allowing the track chain to run smoothly. Without it, or if it's bent, you'd have your track components all over the place, and the machine wouldn't even be able to move. It takes the full weight of the machine and all the dynamic loads from traversing rough ground, so it's got to be stout.
When this TRACK FRAME L.H. starts getting tired, or worse, cracks, you’ll definitely notice things going sideways. Usually what happens is you'll start seeing accelerated wear on your track rollers and idler, sometimes even the sprocket teeth. The track chain itself might not tension right, or it could even jump off the sprocket more often, especially when turning or on uneven ground. A big tell-tale sign is often a noticeable misalignment in the track, or you might hear some grinding or creaking noises that weren't there before, particularly when the machine is moving. It’s not just a minor issue; it puts a ton of stress on everything else down there.
Replacing one of these track frames is a big job, no two ways about it. It’s not something you just swap out in an hour. When you do get around to it, make sure you properly inspect all your track rollers, the idler, and the sprocket for wear, because they’ve likely taken a beating if the old frame was compromised. And don't forget to check the condition of the track tensioning cylinder and its mounting points; sometimes the frame damage can transfer stress there too. Getting the tension right after installation is crucial for longevity.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|---|
| Machine Type | DP1500 |
| Assembly | CRAWLER BEAMS |
Customer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get TRACK FRAME L.H. 55048581
Jumbosan supplies TRACK FRAME L.H. 55048581. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.








