55050003a
RELAY, PLUG-IN
The 550 500 03A RELAY, PLUG-IN is a critical electrical switch that bridges control signals to larger loads on your drilling rig. It ensures reliable activation of various systems, from hydraulic solenoids to motor starters, preventing high current from damaging sensitive control circuits.
Description
550 500 03A RELAY, PLUG-IN is typically found tucked away in the electrical cabinet, acting as a crucial go-between. It takes a relatively small electrical signal from, say, a PLC or a control switch, and uses that to energize a much larger circuit…
Full Technical Description
550 500 03A RELAY, PLUG-IN is typically found tucked away in the electrical cabinet, acting as a crucial go-between. It takes a relatively small electrical signal from, say, a PLC or a control switch, and uses that to energize a much larger circuit. This lets you kick on something heavy-duty like a hydraulic valve solenoid, a big motor contactor, or even just a bank of work lights, all without running high current through the rig's delicate control wiring. It's essentially the muscle that responds to the brain's command.
When one of these starts acting up, you'll usually notice things getting a bit flaky. Maybe that dust suppression pump doesn't always fire up when it should, or it cycles on and off for no good reason. Sometimes, if the coil's going bad or the contacts are getting pitted, you'll hear a distinct buzzing or chattering sound coming from the panel. Other times, a whole function just won't activate at all, leaving you scratching your head until you trace the circuit back to this little guy. They're a common source of those frustrating, intermittent electrical gremlins.
Swapping these out isn't rocket science, but always make sure you've got the power completely locked out first. When you pull the old one, take a good look at the socket or base for any signs of corrosion or arcing, especially if it was an intermittent fault – sometimes the problem isn't the relay itself but a poor connection. And here's a common one: double-check the voltage and current ratings on the new relay against the old. It's surprisingly easy to grab a 12V unit when the circuit needs 24V, or vice-versa, and that'll just lead to more headaches down the line.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|---|
| Machine Type | DC302R |
| Assembly | SWITCHGEAR CABINET ASSEMBLY |
Customer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get RELAY, PLUG-IN 55050003a
Jumbosan supplies RELAY, PLUG-IN 55050003a. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.








