55073632
PLASTIC ENCLOSURE
The 550 736 32 ENCLOSURE, PLASTIC is a common component for low-pressure air or water transfer on your drilling rig. It's crucial for functions like pilot air controls or dust suppression, moving fluids reliably to keep systems operational without the need for heavy-duty hydraulic lines.
Description
550 736 32 ENCLOSURE, PLASTIC is usually found carrying low-pressure air or water on the rig. Think pilot air lines for controls, maybe a water spray line for dust suppression at the bit, or even a simple drain line for condensation. It's not for…
Full Technical Description
550 736 32 ENCLOSURE, PLASTIC is usually found carrying low-pressure air or water on the rig. Think pilot air lines for controls, maybe a water spray line for dust suppression at the bit, or even a simple drain line for condensation. It's not for your main hydraulic circuits, obviously; it's designed for those lighter duties where you need flexibility and a bit of chemical resistance without the heavy-duty pressure rating. It just moves the necessary fluids from point A to point B to keep things like your air-over-hydraulic valves or water injection working right.
When this hose starts to go bad, you’ll usually notice a few things. If it's an air line, you might get sluggish controls, maybe a delay in a cylinder actuating, or even a constant hiss if it’s chafed through somewhere. For water, you'll just see drips, or a puddle forming under the rig, which can sometimes trigger a low-level alarm if it's a critical cooling or dust suppression line. The plastic can get brittle over time with heat and vibration, leading to cracks, or it can get pinched and restrict flow, causing all sorts of weird behavior downstream.
Replacing one of these isn't rocket science, but you gotta make sure you route it properly. Don't just yank the old one out and shove the new one in without checking for pinch points or areas where it might rub against a frame member or another hose. That's usually what kills them prematurely. Also, when you're putting on the fittings, don't overtighten the plastic compression fittings; they'll crack, and you’ll be back doing the job again next week. Just snug them up until they seal.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|---|
| Machine Type | DT820-SC |
| Assembly | ELECTRICAL ASSEMBLY |
Customer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get PLASTIC ENCLOSURE 55073632
Jumbosan supplies PLASTIC ENCLOSURE 55073632. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.








