COOLING TUBE

550 879 09 COOLING TUBE , is usually found protecting the bore where a critical rod or shaft slides through. Think of it as a sacrificial sleeve, keeping the main housing from wearing out prematurely. It guides the moving part, ensuring everything stays aligned and smooth, which is crucial for things like feed cylinders or even certain sections of the drill string. Without it, you'd be replacing far more expensive components much sooner.

When this COOLING TUBE starts to go, you'll often notice increased play in whatever it's supposed to be guiding. That little bit of extra slop can quickly turn into a bigger problem. You might start hearing some knocking or rattling, especially under load, and if you pull things apart, you’ll probably see scoring marks on the rod it was meant to protect. That's a clear sign it's worn past its service limit and isn't doing its job anymore, so don't ignore those early warnings.

Replacing these isn't usually a huge job, but it's one of those things where getting it right the first time saves you headaches down the road. Always make sure the bore it seats into is absolutely clean – no burrs, no old sealant, nothing that could prevent it from sitting flush. And give the new tube a good visual inspection before you even try to install it; sometimes they get dinged up in transit, and you don't want to put in damaged goods.