55212099
MEASURING SYSTEM
The 552 120 99 MEASURING SYSTEM is the critical flow channel that allows your rig to accurately monitor air delivery for flushing and hammer operation, ensuring consistent drilling performance and preventing costly issues.
Description
552 120 99 MEASURING SYSTEM is essentially the dedicated channel where your rig's air flow gets properly measured. Think of it as the 'eye' for the system, telling the control unit exactly how much air is actually moving through for flushing or…
Full Technical Description
552 120 99 MEASURING SYSTEM is essentially the dedicated channel where your rig's air flow gets properly measured. Think of it as the 'eye' for the system, telling the control unit exactly how much air is actually moving through for flushing or powering the DTH hammer. Without an accurate reading here, the machine's just guessing, and that's not how you want to run a drill, especially when you're trying to hit target penetration rates.
When this measuring tube starts to go, you'll usually notice it in your drilling performance. The most common thing is inconsistent flushing – you might see cuttings not clearing as well, or the hammer just doesn't sound right, maybe a bit sluggish or inconsistent on impact. Sometimes, you'll get erratic air pressure readings on your display, jumping around even when the compressor output is steady. That's a pretty good sign something's off in the measurement path, and it can really mess with your bit life and overall efficiency.
Replacing this isn't usually a huge job, but it's crucial to get it right. Always check the sealing surfaces and O-rings when you swap it out; a tiny leak here can throw off your readings just as much as a worn tube itself. And don't forget to inspect the upstream and downstream piping for any debris or build-up that might have contributed to the original part's failure or could affect the new one's accuracy down the line. A clean path is key.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|---|
| Machine Type | RANGER DX500 |
| Assembly | 16 |
Used on machines
Brand
All Sandvik partsRelated parts

MEASURING SYSTEM
55212103
Similar part
EQUIPMENT, MEASURING
55212071b
Similar part
MEASURING EQUIPMENT
55212071a
Similar part
SYSTEM, COOLING
BG00280832a
Similar part

MEASURING SYSTEM
55177128
Similar part

MEASURING SYSTEM
55091393b
Similar part
SCHEMATIC, GREASING SYSTEM
55030114l
Similar part
REMOTE CONTROL SYSTEM, RADIO
BG00431054a
Similar part
Customer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get MEASURING SYSTEM 55212099
Jumbosan supplies MEASURING SYSTEM 55212099. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.
