5534001200
O-RING VITON
The O-RING VITON 5534 0012 00 is a crucial seal, often found keeping hydraulic fluid or air exactly where it needs to be in your rig's systems. It prevents leaks and maintains pressure, ensuring components like cylinders and valves operate smoothly and reliably without internal bypass or external drips.
Description
O-RING VITON 5534 0012 00 is usually found sealing up hydraulic fluid or air in a bore, keeping things from leaking where two components meet. Think of it as the barrier that stops pressurized oil from just squirting out past a valve spool or a…
Full Technical Description
O-RING VITON 5534 0012 00 is usually found sealing up hydraulic fluid or air in a bore, keeping things from leaking where two components meet. Think of it as the barrier that stops pressurized oil from just squirting out past a valve spool or a cylinder rod. It’s critical for maintaining the pressure needed to make things move, whether it’s a feed cylinder or a drifter piston. Without it, you’d have internal bypass or external leaks, and nothing would work right.
When this O-ring starts to go bad, you’ll definitely notice. If it’s on a hydraulic circuit, you might see a slow drift in a cylinder, like the feed head creeping down when it should be holding position, or maybe even a visible weep of oil around a fitting. For air systems, it’s often a hiss you can hear, or a drop in air pressure to a component, which can lead to sluggish movement or inconsistent impact from the drifter. Sometimes, if it’s an internal seal, you’ll just get a loss of power or a component not responding correctly, and that can be a real pain to track down.
Replacing one of these isn't usually rocket science, but getting it right matters. Always make sure the groove it sits in is perfectly clean – no old rubber bits, no nicks, no grit. And for crying out loud, use the right lubricant when you install it; don't just jam it in dry. A little bit of clean hydraulic oil or grease helps it seat properly and prevents tearing on installation. Also, double-check that you're putting in the correct size; a slightly undersized or oversized O-ring will fail almost immediately, or just won't seal at all.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Epiroc |
|---|---|
| Machine Type | Minetruck MT2010 |
Used on machines
Brand
All Epiroc partsCustomer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get O-RING VITON 5534001200
Jumbosan supplies O-RING VITON 5534001200. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.








