CLAMP METER

CLAMP METER 6060 0077 83 This clamp is designed to hold hydraulic hoses and electrical wiring securely against the machine's structure. You will typically find these clamps mounted along the boom, the feed beam, or near the power pack, organizing and protecting critical lines from getting snagged or damaged during operation. Its main job is to prevent movement that leads to wear.

Failure to use the correct, intact clamps can have serious consequences. For instance, a hydraulic hose that is allowed to vibrate and rub against a steel frame will eventually wear through, causing a high-pressure oil leak. This not only stops the machine but also creates a major slip and fire hazard, directly impacting site safety and causing unplanned downtime.

During routine inspections, check that all clamps are present and secure. Look for any cracks in the clamp body or loose mounting bolts. If you see a hose or cable that is sagging or shows signs of chafing, a missing or broken clamp is the likely cause. Replace any damaged clamps immediately to prevent more expensive component failures.