73650902
SCREW DRIVER
The 736 509 02 SCREW DRIVER is a crucial internal component that ensures precise linear actuation within hydraulic control valves. It translates rotational input into accurate movement, vital for maintaining consistent system pressure and flow. When worn, it can cause noticeable pressure fluctuations or inconsistent feed rates, impacting drilling stability.
Description
736 509 02 SCREW DRIVER is typically found tucked away in a hydraulic manifold or a control block, and it's what translates a rotational input into precise linear movement for a valve stem or a small adjustment piston. It's not a big, flashy…
Full Technical Description
736 509 02 SCREW DRIVER is typically found tucked away in a hydraulic manifold or a control block, and it's what translates a rotational input into precise linear movement for a valve stem or a small adjustment piston. It's not a big, flashy component, but it's absolutely critical for getting that fine-tuned flow or pressure just right in your system. Think of it as the small workhorse that makes sure your pressure relief or flow control valve actually opens and closes exactly where it should, preventing over-pressurization or inconsistent flow to your cylinders. Without it, you'd be fighting with erratic system behavior and inconsistent drill performance.
When this little guy starts to wear out, usually what happens is you'll notice things getting a bit sloppy in the system. Maybe your pressure relief valve isn't holding steady, and you're seeing pressure fluctuations on the gauge even when the pump's running smooth. Or, if it's in a flow control, your feed rate might get inconsistent, causing the drill string to bind up or surge unexpectedly. Sometimes, you might even hear a slight chattering or feel a subtle vibration in the control lever if the internal threads or mating surfaces are getting chewed up. It's not always an obvious, catastrophic failure, but it definitely messes with the system's precision and can lead to bigger problems down the line.
Replacing it isn't usually a huge job, but it's one of those parts where you really need to make sure the mating surfaces are clean and free of burrs before you install the new one. Don't just slap it in; take a good look at the valve body or housing it threads into. Often, if the old one was worn, it might have started to gall the housing threads a bit, and you don't want to damage the new part or have it bind up. A quick check with a tap or a good visual inspection can save you a headache later. Also, double-check any torque specs – over-tightening can deform the new component or its housing, and under-tightening means it'll just back out again.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|
Brand
All Sandvik partsCustomer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get SCREW DRIVER 73650902
Jumbosan supplies SCREW DRIVER 73650902. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.



