13824908
SLIDE BODY
The 138 249 08 LATCH BODY is a critical wear component that guides and supports the drill rod or feed beam, ensuring smooth, aligned movement during drilling. It prevents metal-on-metal contact and absorbs operational stresses, maintaining system stability and reducing wear on other expensive parts.
Description
138 249 08 LATCH BODY is essentially a wear pad or guide block, usually made of a tough, low-friction polymer or composite. Its job is pretty straightforward: it keeps the drill rod, or sometimes a feed beam component, running true and smooth as it…
Full Technical Description
138 249 08 LATCH BODY is essentially a wear pad or guide block, usually made of a tough, low-friction polymer or composite. Its job is pretty straightforward: it keeps the drill rod, or sometimes a feed beam component, running true and smooth as it moves in and out. Think of it as the rail that the rod slides along, preventing metal-on-metal contact and keeping everything aligned. Without it, you'd have a lot of slop and binding in the feed system, which is the last thing you want when you're trying to push a bit into rock. It takes a beating, absorbing a lot of the side loads and vibrations during drilling.
When these rod slides start to wear down, you'll definitely notice it. The most common thing is increased play or slop in the feed system. You might hear a new rattling or clunking noise, especially when the rod is moving quickly or changing direction. Sometimes, if one side wears faster than the other, you'll see the rod or feed beam start to bind up or even misalign slightly, causing uneven wear on other components. You might also notice the feed motor working harder, drawing more current, or the feed pressure fluctuating a bit because of the increased friction and resistance. It’s not just a minor annoyance; that extra play can put a lot of stress on hydraulic cylinders, pins, and even the drill head itself.
Replacing these is usually a pretty direct job, but don't just swap it out and forget about it. When you're putting a new one in, always take a good look at the mating surface it slides against – make sure there are no gouges or burrs that will chew up your new slide right away. Also, double-check the mounting hardware; sometimes folks overtighten or undertighten, which can deform the slide or let it work loose. And here's a common one: make sure you clean out any accumulated grit or debris from the slide channel before installation. A little bit of crud can make a new slide wear out way faster than it should.
Applications
- Underground drilling jumbos
- Mining and tunneling
- Hydraulic control systems
- Rock drilling spare parts
Specifications
| Brand | Sandvik |
|---|---|
| Machine Type | RANGER 700-2 |
| Assembly | ROD CHANGER |
Used on machines
Brand
All Sandvik partsCustomer Reviews
No reviews yet.
Reviews come from verified buyers: customers whose quotation for this part was accepted.
How to get SLIDE BODY 13824908
Jumbosan supplies SLIDE BODY 13824908. Choose the way that suits you.
Send a quote request form
Fill in the short form with the quantity and your company details. We reply with availability and lead time.
Contact us by email
Email [email protected] with the part number and the quantity you need.
Message us on WhatsApp
Send the part number to +90 543 279 89 81 on WhatsApp and a salesperson replies in the chat.
Send your list to the AI quote page
Upload a PDF, photo or spreadsheet of part numbers. The AI reads it and builds the request for you, which suits long lists.







